Home > Error Code > Error Tx Report Ng 0801

Error Tx Report Ng 0801


Action Print, send, or delete any documents stored in memory. RESULT Prints "OK" or "NG." If a send job is cancelled, is printed in the Results column on the Send report. Further infomation is: Time use : … Solved: Canon Imagerunner 2200 "Error TX Report" I am trying to send faxes on a Canon Imagerunner 2200 but it fails everytime. Click [TCP/IP Settings] under [Network Settings] and check the Domain Name of the DNS Settings on the TCP/IP Settings screen. NOTE You can also check the DNS Settings on

Connection to the DNS server may have been failed. If the SMTP mail server is not set properly, e-mails or Ifaxes cannot be sent. Has happened for all fax numbers tried You need to apply Canon's firware update at http Prev123456789Next » Not finding what you are looking for? The Error Unrealircd.conf Unexpected Eof error is the Hexadecimal format of the error caused.

Canon Result Ng 801

A timeout error occurred while the machine was communicating with the SMTP server to transmit an e-mail message, or transmit/receive an I-Fax, due to a problem with the server.The SMTP server The four digit number, that is automatically assigned when the document is accepted for sending, is printed. Search Engine Optimisation provided by DragonByte SEO v1.0.16 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.Donation System provided by vBDonate (Pro) - vBulletin Mods & Addons Copyright Action Check that the SMTP server is functioning normally, or check the network status.

Remedy1 Reduce the resolution or divide the document into two or more parts, and then try sending the document again. (See "Resolution Settings.") Remedy2 When receiving a document, ask the remote Action2 Check the network status. You can too!… HP Printer Control enables you to set up and access your connected HP printers. Canon Error Code 839 Main Power Switch Position (MF4680) (See the relevant title in Related Information at the end of this page.) Q.Is the [Energy Saver] key lamp on?

Action This machine can store up to approximately 1,000 pages of data in memory, but will delete any data that exceeds this limit. Canon Error Code 801 Scan Folder A.Check that the SMTP server is operating properly. Service Manual Requests Business Talk For Sale, Trade, or Wanted The Parts Room Employment Non-Technical Forums Rants, Raves, and Everything Else Arcade Discussion Industry News Test Forum « Error code E Since the connectivity problems are intermittent, the clients' default gateway settings must be correct (or there would be no connection at all to any remote nodes on different sub-nets).

Click the [Properties] button to open the [ Properties] dialog box. 5. Canon Error Code 751 Q.Have you specified the one-touch key or coded dial code that has registered with other than fax number when the line is off the hook? The destination is not correct. How to Open and Close the Toner Cover (MF4680) (See the relevant title in Related Information at the end of this page.) [LOAD PAPER] is displayed.

Canon Error Code 801 Scan Folder

Press [Off] if you do not want to print it. Hello. Canon Result Ng 801 Description1: A … ← Previous Post Next Post → If you enjoyed this article please consider sharing it! Kyocera Error 0801 A.Refer to the following to remove all pieces of paper and other foreign objects.

Remedy2 Delete unnecessary documents and documents with errors to make more memory available. (See "Scan and Store," "Fax/I-Fax Inbox," and "Access Stored Files.") Remedy3 If this problem occurs frequently, contact your Action Check the user name and password for SMTP Authentication (SMTP AUTH) in Encryption Settings in E-mail/I-Fax Settings in Network Settings in System Management Set (from the Additional Functions screen). (See Check the e-mail address settings. Disable Power Over Ethernet on the Cisco Switch for the port to which the imageRUNNER is connected. Canon Scan To Email Result Ng

How to Replace the Toner Cartridge (MF4680) (See the relevant title in Related Information at the end of this page.) [PAPER JAM/LIFT PANEL TO OPEN] is displayed. Q.Have you specified multiple recipients when using a color sending? All the above actives may result in the deletion or corruption of the entries in the windows system files. Your feedback is used to help us improve our support content.

SEE LINK>>>>>>>>>>>>>>>>>>>>> Color imageRUNNER C1022/C1022i e-Manual **Knowledge is time consuming, exhausting and costly for a trained Tech.** Reply With Quote 10-23-2011 #4 zoraldinho View Profile View Forum Posts Private Message Field Canon Imagerunner Error Codes Also print or send the documents stored in memory, or refer to the following to erase unnecessary documents from memory to increase the amount of available memory. Is the DNS server functioning normally?

Remedy Try performing the job again with the new Department ID and password.

Thanks in advance. Description2 The data size exceeds the available memory. A.The USB memory port may have problem. Smtp Gmail A.Refer to the following to set the correct user name or password for the SMTP authentication in [SMTP AUTH] in [AUTH/ENC SETTINGS] in [E-MAIL/IFAX] in [NETWORK SETTINGS] in [SYSTEM SETTINGS].

A Canon/EFI Print Controller (network node) experiences intermittent connectivity problems on large networks from certain remote computers. It sends a page to me titled "error tx report". … TX simply means Send, so you have a send error. Action Confirm that the recipient's machine is able to communicate, and then try again. Novice Computer User Solution (completely automated): 1) Download (Error Unrealircd.conf Unexpected Eof) repair utility. 2) Install program and click Scan button. 3) Click the Fix Errors button when scan is completed.

Q.Is the USB memory inserted correctly to the machine? Action Check TCP/IP Settings in Network Settings in System Management Set (from the Additional Functions screen). Q.Are you printing received fax documents, reports, or lists while paper is loaded in the multi-purpose tray? You may NOT copy or distribute the content that appears on this site without written permission from Fixya Ltd. © 2005-2015, Fixya, Ltd.

Error Code Printed in the Report. Computers on the same sub-net as the Controller work fine. ********* The fact that the local computers work fine while some computers on other remote sub nets have connectivity failures indicates This new Network Board PCB Assembly now includes support for networks using Cisco's Power Over Ethernet function. Ltd.

A.Make sure that correct e-mail address is specified. I gotta feeling that there are certain backend stuff over at the ISP that could cause the feature to be unworkable. Check the network status. Then, press [OK] and try again.

Remedy Check to see that the power plug is firmly inserted into the power outlet and that it is not in a situation where the power can easily be turned OFF. The destination is not correct. Action Check the name of the SMTP Server in E-mail/I-Fax Settings in Network Settings in System Management Set (from the Additional Functions screen). (See "Settings from the Machine (E-Mail/I-fax).") Check the Remedy1 Resend the document at a lower resolution.

It solved my issue It covered my problem, but the solution still didn't work for me The information on the page is hard to understand It has nothing to do with How to Change the [SMTP AUTH] Setting (MF4680) (See the relevant title in Related Information at the end of this page.) Other error code ([#xxxx]) is displayed. All rights reserved. To unlock all features and tools, a purchase is required.

© Copyright 2017 All rights reserved.